VENTION Cat.6 UTP Modular RJ45 Connectors (Pack of 10)

Description

The pack of 10 Cat.6 UTP modular RJ45 connectors from the VENTION brand is a set of technical-grade male plugs, specifically configured for network installers, IT maintenance technicians, and B2B infrastructures. Designed for the assembly, connection, and repair of custom Ethernet cords, these transparent modular heads guarantee a high-stability physical and electrical link, essential for sustaining corporate local area network (LAN) architecture.

In terms of network engineering, these connectors scrupulously respect the performance requirements of category 6, allowing for data transmission speeds of up to 1 Gbps (Gigabit Ethernet) over a 250 MHz bandwidth. The internal architecture of the insertion channels is calibrated to accept insulated copper conductors of a standardised gauge from 23 AWG to 24 AWG, avoiding frequent blockages when routing twisted pairs. The contact pins adopt a three-prong geometry made of a high-conductivity copper alloy, complemented by a surface treatment with gold plating to eliminate any risk of premature oxidation and ensure minimal contact impedance over time.

The overall structure of the connector is injected into an industrial-grade polycarbonate (PC), selected for its high transparency (allowing immediate visual inspection of wire alignment according to T568A or T568B standards) and its high mechanical resilience. The upper locking latch is designed to undergo repeated bending cycles without breaking, thus avoiding accidental disconnection of the cord from network switches or workshop patch panels.

Technical Specifications

• Technology / Material: High-tenacity transparent polycarbonate monocoque housing and copper alloy three-prong pins
• Network category: Cat.6 certified (Backward compatible with Cat.5e and Cat.5)
• Shielding type: UTP / Unshielded Twisted Pair (Unshielded connector for U/UTP cables)
• Pin configuration: 8P8C (8 Positions / 8 Contacts)
• Cable section compatibility: Optimised for 23 AWG to 24 AWG gauge copper conductors (solid and stranded wires)
• Contact treatment: Gold-plated finish for maximum conductivity and protection against corrosion
• Packaging: Economic pack containing 10 RJ45 connectors

Workshop Advice & Usage

To ensure the compliance of your Cat.6 cabling in the workshop and validate the certification of links with a cable tester, ensure you strictly respect the colour code of universal wiring standards (generally the T568B standard in a professional environment). Before operating your crimping tool, perform a visual check through transparency to ensure that the 8 copper conductors butt perfectly against the bottom of the connector and that no wires have crossed. As these are UTP (unshielded) type connectors, they must be installed exclusively on unshielded network cable; their integration on an FTP or STP type cable would prevent the grounding of the metallic drain, which could generate parity errors or make the installation sensitive to electromagnetic interference in the workshop.